- LED components
- UV LED light
- LED grow light
- LED fiber optic light
- LED display
- Flexble LED strip
- LED pixels light
Latest news
Contact us
- ADD: 4Floor,HaoLong Building, HongMa Road, Baoan district,Shenzhen,China 518106Shenzhen,China 518125
- TEL: 0755-23306837
- FAX: 0755-23306837
- E-mail: sales@kinggreenled.com
> High power 1-5W
Professional manufactur high power 5W White / Red / Green/ Blue /Yellow /Orange/ Pink / Cyan color LED diode
- Product description:
Product introduction
Specifications :
Type: High power LED
Power: 5W
Color : White / Red /Deep red/ Green/ Blue /Royal blue /Yellow /Orange/ Pink / Cyan
Luminous efficacy: White 400-450LM / Red 100-120LM /Deep red 70-85 / Green 140-146LM/ Blue 55-75LM / Royal blue 45-55LM / Royal blue 35-45LM / Yellow 120-160LM / Orange 120-160LM / Pink 160-170LM / Cyan 200-220LM
Chip brand: Epileds
Stent material: Copper stent
Wavelength & Color temperature : White 3000~25000K / Red 620-630nm / Green 520-530nm /Blue 460-470nm / Royal blue 450-460nm /Royal blue 440-445nm / Yellow 590-590nm /Orange 600-605nm / Pink 2000-2400K / Cyan 485-500nm
Beam Angle:120 degree
Life:>50000Hr
Forward Voltage(Vf): 3.2-3.6V /Red /Yellow/ Orange 2-2.5V
Forward Current(IF): 1400mA
Product feature :
1.LED using the high quality encapsulation material with
copper stent , Doublink 99.99% gold wire , Taiwan and American chip brand (Epistar ,Epileds , Bridgelux),Dow corning resin, Intematix phosphor
2. high reliable ,high lighting effect
3. products supplies 100% full power.
4. Low heating generation to reduce electricity consumption
5. Great reducing carbon emission
6. Minimizing drastic climate change
7. Great reducing maintenance cost
8. Long lifespan
9. Instant start, no flashing
10.Low consumption, high brightness.
Product applications :
1. Commercial lighting
2. Architectural Lighting
3. General lighting
4. Automotive lights
5. LED module
6. Traffic Light
7. LED display and so on
Product picture :
product dimension:
1.Over-current-proof
Customer must apply resistors for protection;other wise slight voltage shift will cause big current change(burn out will happen )
2.Storage :
1. It is recommended to store the product in the following conditions : humidity 60% R.H.Max temperature :5 ℃-30℃(41℉-86℉ )
2. Shelf life in sealed bag :12 month at <5 ℃-30℃ and 30% R.H.after the package is opened, the products should be used within a week or they should be keeping to stored at ≤20R.H. with zip-lock sealed
3. Baking
It is recommended to baking before soldering when the pack is unsealed after 24hrs .The conditions are as following:
70±3℃ x24hrs and <5%RH,taped reel type
100±3℃ X2hrs ,bulk type
4. Static Electricity
(1).Static electricity or surge voltage damages the High Power LED. It is recommended that a wrist band or an anti-electrostatic glove be used when handing the LEDs.
(2).A tip soldering iron is requested to be grounded, An ionizer should also be installed where risk of static.
(3).All devices, equipment and machinery must be properly grounded, It is recommended that measures be taken against surge voltage to the equipment that mounts the High Power LED.
5. Cleaning
(1). Ethylene Alcohol is recommended in 5 minutes at room temperature. Do not use unspecified chemical may cause crack or haze on the surface of the epoxy resin.
(2). Before cleaning, a pre-test should be done to confirm whether any damage to the LED will occur.
(3). Freon solvent should not be used to clean the LEDs because of worldwide regulations.
6. Heat generation
(1). When the LEDs are illuminating, operating current should be decided after be considering the ambient maximum temperature.
(2).Please consider the heat generation of the LED when it is designed the PCB.
(3). The LEDs must be mounted on metal core PCB or heat sink or applied thermal pad.
7. Handing LED
When handing the LED with tools like tweezer or nipper, do not apply mechanical forces directly on LED's surface. Do not touch with hand LED lens surface directly. LED should be handled from side
8. Soldering LED
1 .No pressure should be exerted to the LED lens under high temperature
2.Do not scratch or wipe the lens since the lens and gold wire inside are rather fragile and cross out easy to break
3 .LED should be used as soon as possible when being taken out of the original package,and should be stored in anti-moisture and anti-ESD package.
KINGGREEN
KINGGREEN